Novopared PVC

Profile with “L” section to be installed as an edge protector in ceramic installations or similar. This profile, made of high quality PVC, can also be installed as flooring separator or countertop finish among others. It is available in a wide range of colors.

L-Shape profile to finish off wall tiled corners.

As it is available in a wide range of heights, it is always appropriate for all kind of wall tiling, no matter what size the tile is.

It is available in plain decorated and anodized colours, brass, stainless steel and PVC.

General Features
Material: PVC
Length: 7'11" 
Dimensions: 5/16” 
Packaging: 100 u./box

Applications
Novosuelo/Novopared PVC is a profile designed to protect edges of ceramic installations. It can also be installed as a flooring separator or countertop finish among others.

Materials
Novopared/Novosuelo PVC is a profile made by coextrusion of PVC-P (rigid PVC) and PVC-U (flexible PVC). PVC-U provides a perfect adaptability to corners while PVC-P is suitable, due to its rigidity, to be the piece to be placed in the tiles as a support.
PVC (polyvinyl chloride), is a polar amorphous thermoplastic polymer highly resistant to abrasion, corrosion and a wide range of chemical products. Has a good resistance to impact, low water absorption, low electrical conductivity and is dimensionally stable.

Installation

Walls
1. Tile one of the sides of the wall to be tiled. Then, spread a big amount of thin-set mortar on the other side.
2. Place the Novosuelo/Novopared on the corner and press to let the thin-set mortar pass through the holes of the anchoring wing. Place the Novosuelo/Novopared on the angle and press to let the adhesive material pass through the machined holes of the fixing wing.
3. Place tiles along the anchoring wing and then press them softly to get optimal adhesion.
4. Continue tiling until the installation is finished.
5. Clean any possible leftovers and let dry."

Floors
1. Spread a big amount of thin-set mortar on the surface to be tiled.
2. Then, place the profile and press it to let the thin-set mortar pass through the holes on the anchoring-wing.

3. Place a tile on the anchoring wing of the profile and press to get an optimal contact with the thin-set mortar.
4. Repeat the previous step placing tiles along the profile until the installation is finished. Before curing, tap with a rubber hammer to align the profile with the pavement.
5. Finally clean the leftover material and let dry.

Cleaning and maintenance
The cleaning can be done with water and detergent or specific cleaner diluted. The correct use of bleach do not affect PVC.
It is not recommended using chromic acid, sulfuric acid or organic solvents as ethyl acetate, acetone or toluene.